DuraFlex Chimney Cleaning Service in Midland, TX

Why Midland Homeowners Choose DuraFlex Chimney Cleaning

We provide independent DuraFlex chimney cleaning and service in Midland, TX. That means we sweep, inspect, and repair DuraFlex flexible stainless steel liners on their own merits, using quality parts that fit them, with no affiliation to the manufacturer and no script from a sales department. What sets our DuraFlex work apart is that we’ve handled hundreds of these liners across the Permian Basin and we know how they age here: cracked top-plate seals, glazed creosote on ribbed walls, clamps that loosen after years of heat cycling.

Call (866) 942-7865

Our scope covers creosote removal, Level 2 inspection, and crown repair on DuraFlex-equipped chimneys throughout Midland – north-side subdivisions, west-side homes, the older ranch houses near downtown. We also work with HeatShield and Gelco products when a job calls for them. To book, call (866) 942-7865. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Why Trust Chimney Sweep Midland for Your DuraFlex Chimney Cleaning?

Tony Rhodes leads the company and has spent most of his working life around chimneys and ventilation. He grew up in the Midland Park neighborhood, took HVAC and building trades coursework at Midland College, and worked in the trade well over a decade before starting Chimney Sweep Midland in 2011. That background shows up in how we diagnose DuraFlex systems: we read the liner, not a checklist.

Chimney Sweep Midland has served Midland for 15 years. In that time, our technicians have learned where DuraFlex liners fail first – often at the top plate, where water gets in and rusts the liner from the outside in. We use brushes and rods suited to smooth-wall and corrugated liner construction so we don’t crush or score the metal. We source our repair components through Olympia Chimney and Copperfield, the same supply chain professional chimney contractors rely on, rather than improvising with hardware-store substitutes.

Warranty-safe practice matters with any manufactured liner. We document what we find with a camera inspection and photo report so you have a record in hand if a warranty question ever comes up. Tony puts it simply: “If I can show you what I found, I will – a flashlight and a straight answer go a long way.”

Common DuraFlex Chimney Cleaning Problems We Fix in Midland

Flexible stainless liners develop a predictable set of problems. Here’s what we run into most often on DuraFlex systems in Midland, and why each one happens.

• Crown and top-plate leaks. Water gets past a cracked seal at the top and sits in the annular space between liner and flue, rusting the metal from the outside in. Homeowners often notice it as a stain on the chimney breast or a musty smell after rain, long before the liner visibly fails.
• Glazed creosote on corrugated walls. The ribs that give a flexible liner its bend also trap soot, and stiff brushing skips over the valleys. Stage-3 glazing builds up faster on rough interior surfaces than on smooth ones, so a corrugated DuraFlex liner needs a sweep who knows how to work those ribs properly.
• Loose joints and separated clamps. Years of heating and cooling work the bands and clamps loose. When a mid-joint separates, draft drops and flue gases can leak into the chase instead of going up and out.
• Crushed or damaged sections. Stiff poly brushes used too aggressively, or masonry shifting around the flue, can buckle a liner section. A crushed spot restricts draft and is one of the few problems that genuinely can’t be swept away.
• Dust and debris intrusion. Midland’s caliche grit and spring winds push fine dust into caps and flues. A cap that pops loose under the area’s hard temperature swings lets in twigs and grit that settle at the bottom of the run.

One recent Midland job summed it up well: a homeowner with a DuraFlex SW smooth-wall liner called because smoke rolled into the room on cold starts. Our technician ran a Level 2 inspection, found the liner clamps had loosened at the mid-joint and the top-plate seal was cracked from sun and freeze-thaw, then swept out glazed creosote, re-secured the joint, and resealed the plate. Draft came back and the smoking stopped without replacing the liner.

DuraFlex Parts & Our Repair-vs-Replace Approach

We keep DuraFlex-compatible aftermarket top plates, clamps, and caps on the truck so common fixes don’t wait on a special order. When a liner is actually compromised, we order genuine DuraFlex replacement sections. We’re clear about which situation you’re in.

The decision usually comes down to what the camera shows. A liner with sound metal and a cracked seal gets resealed. Loose clamps get re-secured. Glazed creosote gets swept and the cause addressed. When a run is too rusted through or crushed to hold draft safely, we’ll say so and explain why, then quote the reline. We don’t push a new liner on one that still has life in it, and we don’t patch one that’s past saving.

If you’re unsure which category your liner falls into, a Level 2 inspection settles it. Call (866) 942-7865 and we’ll take a look.

Our DuraFlex Service Process – Step by Step

1. 1
   Diagnosis. We start with a Level 2 inspection: camera down the flue, a look at the top plate and crown from above, and a check of clamps and joints. You see the images.
2. 2
   Repair or install. Based on what we find, we sweep, reseal, re-clamp, or install a replacement section. On reline work, we fit DuraFlex stainless flexible liner components to the flue.
3. 3
   Test. We verify draft after the work, check that the top plate seals, and confirm no smoke rolls back on a cold start.
4. 4
   Warranty and record. You get the photo report and a plain description of what we did, useful documentation if a manufacturer warranty question ever arises.

DuraFlex Products We Service & Install in Midland

Our DuraFlex work covers the flexible stainless liner systems used in Midland homes: DuraFlex SW smooth-wall liner kits, DuraFlex Pro relining systems, and DuraFlex 316L and 304L alloy flexible liners. We sweep them, inspect them, reseal crowns and top plates above them, and handle clamp and joint repairs. Where a liner is beyond repair, we install new DuraFlex flexible stainless liner runs.

Because many Midland subdivisions were built fast in the 1990s through the 2010s with prefab and gas-log fireplaces, we do a lot of prefab inspection and cap-and-crown work on DuraFlex-equipped chimneys rather than heavy historic masonry. The same liner construction behaves differently on a spec-home install than on a custom build, and we account for that.

We Also Service These Brands

DuraFlex is one of several professional brands we work with. We’re certified to apply HeatShield ceramic resurfacing, which restores a salvageable flue rather than relining it outright. We install Gelco chimney caps and covers. We also source through Olympia Chimney, Famco, and Copperfield for venting and repair components. One call covers chimney sweep, repair, and dryer vent – no referrals out for routine system work.

FAQs – DuraFlex Chimney Cleaning Service in Midland

Book Your DuraFlex Service in Midland, TX

If your DuraFlex liner needs a sweep, a Level 2 inspection, crown repair, or a joint re-clamp, one call covers it. We’re an independent DuraFlex service provider, insured and bonded, and we show you what we found before we recommend anything. Call (866) 942-7865. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Written by Tony Rhodes, Owner at Chimney Sweep Midland, serving Midland since 2011.