Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
DuraFlex Chimney Cleaning in Midland, TX
We provide independent DuraFlex service across Midland: sweeping, Level 2 inspections, cap replacement, creosote removal, and repair on the flexible stainless steel liners that sit inside prefab and factory-built chimney systems. We are not authorized, sponsored, or warrantied by DuraFlex, and we say that up front. What makes our DuraFlex work in Midland different is that we tie every recommendation to what this climate actually does to a top plate, cap, and liner – the dust storms, the hard freezes, and the boom-town housing churn that leaves a fireplace unswept for years. Call (866) 942-7865 for a free estimate.
Why Midland Residents Choose Us for DuraFlex Service
DuraFlex is a flexible stainless steel chimney liner, and a lot of homes around Midland have one inside a prefab or converted fireplace. When we open it up, we’re looking for the parts that fail first: the top plate seal, the support collar, the liner-to-appliance connection, the cap screen. Knowing that component stack is the whole job. It’s how we get from “the flue smells off” to a specific answer you can see for yourself.
We work with trade-grade brands on purpose – DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield – because on a factory-built system, fit and clearances matter more than price tags. A cap that seats right sheds caliche grit. One that doesn’t traps it.
Tony Rhodes runs Chimney Sweep Midland, and he grew up in the Midland Park neighborhood, most of a life within a few miles of the streets where he learned to ride a bike. He came up through trade coursework at Midland College before he ever sent a brush down a flue, and he spent well over a decade in the trade before starting the company in 2011. We’ve served Midland for 15 years. That means we know how a fireplace in a brick-veneer subdivision north of Loop 250 behaves differently from a ranch home near downtown, and we schedule around what your system actually needs.
Ask him what’s wrong and he’ll tell you straight: “If I can show you what I found, I will – a flashlight and a straight answer go a long way.”
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common DuraFlex Chimney Cleaning Problems We Solve in Midland
These are the DuraFlex issues we run into most around Midland, and most of them trace back to the local weather and housing churn:
- Insulated liner pulling free of the appliance collar. On short exterior runs common to Midland prefab installs, a hard freeze cycle causes expansion and contraction at the top plate, and a DuraFlex SW liner can work loose where it meets the appliance. We re-seat the connection and check clearances.
- Clogged top-plate and cap assemblies. Permian Basin caliche dust and mesquite twigs collect on the cap screen and block the flue, trapping moisture against the metal. We clear the blockage and replace the cap when the screen is past cleaning.
- Cracked or spalled crowns over DuraFlex systems. In 1990s-2010s brick-veneer subdivisions, a failing crown lets water wick down the liner chase after spring wind-driven rain. We seal the crown and inspect the flue for water damage.
- Glazed creosote from sporadic burns. A DuraFlex flue that sat unused for a year and then got burned hard during a January cold snap dries and glazes its creosote. That’s harder to remove than steady annual buildup, and it needs a proper sweep.
- Nests and stuck dampers in homes never swept. A DuraFlex reline on a house that changed hands can carry a blocked damper or a bird nest the new owner never knew about. A Level 2 inspection finds it before the first fire.
DuraFlex Service in Midland: What Local Conditions Mean for Your Equipment
Semi-arid High Plains weather is the whole story for a DuraFlex system in Midland. Hot dry summers and occasional hard freezes let creosote dry and crack between burns, and persistent spring dust and high winds drive grit and debris down into flues and caps. After a spring dust storm or a hard freeze, sweepers on the north side of town routinely pull caliche dust, dried twigs from mesquite, and cracked tile from caps that pop loose under the violent temperature swings. On a DuraFlex assembly, that grit means a cap screen that clogs sooner than most homeowners expect, and a top plate that takes the brunt of the freeze-thaw cycling. The seasonal calendar matters more here than heavy annual burn loads. If your fireplace sits dark from March to November and then runs hard all winter, your flue is doing its work in bursts, and the wear pattern on a DuraFlex liner shows it.
DuraFlex Models & Products We Service in Midland
We service the DuraFlex products that show up in Midland homes: DuraFlex SW insulated flexible stainless relining kits, DuraFlex Pro liners for wood and gas appliances, DuraFlex reline kits on prefab fireplace conversions, and multi-flue plus top-plate cap assemblies. Each one has its own tolerances, and each one needs parts that fit – not a universal cap forced onto a top plate it wasn’t sized for. That’s why we stock genuine DuraFlex replacement components: caps, top plates, support collars, and liner sections. For non-structural parts like cap screens and crown coatings, quality aftermarket parts are an honest, cost-smart choice. We lean on HeatShield ceramic resurfacing when a flue can be restored instead of fully relined, and we say plainly when a system is past repair.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Service Pricing in Midland
Every DuraFlex job here is priced per job by a written estimate, and the estimate is free. What drives the cost is the scope: a straight sweep and cap cleaning sits at one end, and a liner repair or re-seating with a Level 2 inspection sits higher because of the access and parts involved. We don’t quote a number before we’ve looked. On the visit, we run a camera inspection and hand you the photo report, so you’re not taking our word for what’s inside your flue. If a DuraFlex cap screen is clogged but sound, we clean it and tell you it can wait. If a crown is failing, that’s a different conversation, and you get to see why. Call (866) 942-7865 for a free estimate.
Serving Midland, TX – Our Local Coverage Area
We serve Midland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – DuraFlex Chimney Cleaning in Midland
If your DuraFlex system has sat unswept for several years, a Level 2 inspection is what we recommend. It walks the whole flue and component stack – top plate, support collar, cap – and catches the debris and blockages that a routine check misses. That’s the inspection we schedule in Midland, and it ends with a photo report you keep.
Because the cap screen is catching what the wind carries – Permian Basin caliche grit and mesquite twigs – and on a DuraFlex top-plate assembly that grit packs against the screen and traps moisture with it. We clear the blockage and replace the cap when the screen is past cleaning.
It can pull loose at the appliance collar and stress the top plate as freeze-thaw cycles work the metal, which is exactly what happens on the short exterior runs common to Midland prefab installs. We check the connection and the plate on every Level 2 inspection, and re-seat what’s loose before it becomes a bigger repair.
Repair is the right call when the cap body is sound and only the screen is clogged or torn; replacement makes sense when the top plate or cap structure is bent, rusted through, or won’t seat. We stock genuine DuraFlex caps and top plates, so the fit is right the first time. Call (866) 942-7865 – estimates are free.
No. The dry air lets creosote dry and glaze between burns, which is harder to sweep out than steady buildup, so a fireplace that sits unused and then burns hard all winter builds up a stubborn layer. A seasonal sweep handles it before it hardens. Call (866) 942-7865 for an exact quote.
Service Areas Near Midland
We work across Midland and the communities around it – Stanton to the east, Gardendale and Odessa to the west, West Odessa, and McKinney Acres. If your DuraFlex system is in one of these towns, the same crew and the same trade-grade parts come to you. We schedule the visit around what your system needs, not a route.
Book Your DuraFlex Service in Midland Today
If your DuraFlex liner, cap, or top plate needs a look, call Chimney Sweep Midland at (866) 942-7865. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The estimate is free, and we’ll show you what we found before we recommend anything.
Written by Tony Rhodes, Owner at Chimney Sweep Midland, serving Midland since 2011.