Gas fireplace service
Sweep & inspection
Caps & crowns
Flue relining
Masonry repairLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fireplace Services Cost in Midland?
Fireplace services in Midland typically run $95-$250 for a standard chimney sweep, $180-$450 for a Level 2 inspection with camera, and $350-$900 for minor masonry or firebox repairs. Larger jobs climb from there: a HeatShield ceramic flue resurfacing usually lands between $1,400 and $2,800, and a full DuraFlex stainless liner installation runs roughly $2,600 to $5,200 depending on flue height and liner diameter. Those are the ranges we work from in Midland in 2026, and the written estimate you get after we look at the chimney sets the final price.
What makes pricing here a little different from other parts of Texas: Midland sits in the Permian Basin, where wind and blowing caliche dust work on chimney exteriors and caps year-round, and the dry air pulls moisture out of masonry fast enough that small cracks go unnoticed until they widen. A mild winter still means the fireplace gets used, so the system needs to be sound. We serve homeowners across Midland and the surrounding neighborhoods, and every estimate is free.
Key Takeaways
- A standard sweep in Midland is $95-$250, most often around $150-$200.
- Chimney caps, dampers, and crown repairs usually fall between $250 and $750 installed.
- Chimney relining with DuraFlex is the biggest single line item, at $2,600-$5,200.
- HeatShield ceramic resurfacing can restore a damaged flue for $1,400-$2,800, well below a full reline.
- Dryer vent cleaning, which we offer as a fire-safety service alongside chimney work, runs $125-$225.
Fireplace Services Cost Breakdown (2026)
Here’s how the work lines up by category. These are typical Midland ranges for residential homes, and each one assumes a normal single-flue chimney or a standard wood-burning insert. Two-flue chimneys, rooftop access issues, or a chase that needs opening will push a job toward the top of a range or above it.
| Service | Typical Range | What It Covers |
|---|---|---|
| Standard chimney sweep | $95 – $250 | Creosote removal, firebox cleaning, damper check, basic visual inspection |
| Level 2 inspection (camera) | $180 – $450 | Video scan of the flue, joint and liner assessment, written report |
| Chimney cap installation | $250 – $550 | Gelco cap sized to the flue, with screen and mounting |
| Damper replacement | $300 – $700 | Top-seal or throat damper, fitted and tested |
| Crown repair or rebuild | $400 – $1,200 | Crack sealing or full crown pour, flashing check included |
| Firebox and masonry repair | $350 – $900 | Mortar joint repair, brick replacement, firebox parging |
| HeatShield ceramic flue resurfacing | $1,400 – $2,800 | Ceramic resurfacing of a salvageable clay flue |
| DuraFlex stainless liner installation | $2,600 – $5,200 | Full flexible liner, insulation, top plate, and termination |
| Dryer vent cleaning | $125 – $225 | Full-length lint removal, vent run inspection, termination check |
The single biggest driver of where your price lands is what the flue looks like inside. A sweep is quick when the creosote is light and glazed buildup hasn’t taken hold. Once a flue is cracked or deteriorating, the cost jumps into repair or relining territory, because the fireplace can’t safely be used until the flue is sound again. The good news: not every damaged flue needs a new liner. HeatShield is a ceramic resurfacing product we’re certified to apply, and it lets us restore a salvageable flue for a fraction of what a full reline costs. That’s a real middle option that sweep-only shops can’t offer because they don’t carry the capability.
Material choices matter too. We reline with DuraFlex flexible stainless systems, source components through Olympia Chimney and Copperfield, and use Gelco caps and Famco-compatible venting parts. Trade-grade materials cost more than the hardware-store substitutes, and they’re what keeps a job holding up after a decade of Midland summers. When we put a number on the estimate, it reflects the product that’s actually going up on the roof, not a cheaper stand-in.
What Affects Fireplace Services Pricing in Midland
- Flue condition and creosote level. Light, dusty creosote sweeps out easily. Glazed or heavy buildup takes longer and more care, and if the flue is cracked underneath, the scope grows. This is the factor that most often moves a job from sweep pricing into repair pricing.
- Flue height and roofline access. Tall Midland chimneys on steep-pitch roofs need more setup and more time. A single-story ranch with an easy roof line sits at the low end; a two-story with a tight eave does not.
- Number of flues. A chimney serving both a fireplace and a furnace or insert has two flues. Each one needs its own sweep and its own inspection, so a two-flue chimney often lands close to double the sweep cost.
- Liner diameter and length. DuraFlex liner pricing tracks the length of the run and the diameter, because the liner is purchased by the foot. A tall chimney with an oversized flue takes more material, and the estimate reflects that.
- Weather and blowing dust on caps and crowns. West Texas wind loads caps and crown edges hard. When a crown has opened up or a cap has pulled loose, we’re rebuilding it under trade-grade spec rather than patching it, and that changes the labor hours.
- Whether the fireplace has an insert. Wood-burning inserts need the surround pulled to inspect and sweep properly, which adds a little time. We account for that in the estimate rather than discovering it mid-job.
One thing that does not change the price: whether you call us today or next week. The written estimate sets the final number, and that number is per job, based on what the chimney actually needs. We don’t add a premium for faster scheduling.
How to Save on Fireplace Services
The most reliable way to keep fireplace costs down in Midland is to catch problems before they spread. An annual sweep with a visual inspection costs a lot less than a reline, and the inspection is where we spot a hairline crack or a loosening crown before it turns into a repair bill.
- Schedule the sweep before the burn season starts. A clean, inspected flue lets you start using the fireplace with confidence, and it’s the cheapest service we offer. If you’ve been burning a lot, don’t wait a full year between sweeps. Glazed creosote buildup is harder to remove than light deposits.
- Ask whether HeatShield is an option before you agree to a reline. If a flue is deteriorating but still salvageable, ceramic resurfacing can save you well over a thousand dollars compared with a new DuraFlex liner. Ask the question explicitly, because not every shop carries the capability.
- Fix the cap before the crown. A missing or loose cap lets water and blowing dust into the flue, which accelerates damage to the crown and the masonry. Putting a Gelco cap on early is one of the least expensive interventions on the whole list.
- Bundle the dryer vent cleaning with the chimney visit. We handle both, so scheduling them together saves you a separate visit. Dryer vent cleaning is a fire-safety service, not a cosmetic one; a clogged vent is one of the leading causes of residential fires, and it’s a job most homeowners put off for years.
- Get the estimate in writing before the work starts. Free estimates cost you nothing, and a written number is what protects you from scope creep. Call (866) 942-7865 and we’ll put the scope and price in front of you before a single tool comes off the truck.
We’ve been doing this work since 2011, and over those 15 years we’ve learned that a straight answer up front saves everyone time. If a repair isn’t needed yet, we say so. If a reline is the right call, we explain why the liner is the only safe option. The estimate is free either way.
Which Fireplace Repairs Are Worth Doing in Midland?
Repairs on a fireplace are almost always worth doing if the alternative is not being able to use the fireplace at all. The economics are simple: a HeatShield resurfacing at $1,400-$2,800 restores a salvageable flue, while a full DuraFlex liner at $2,600-$5,200 is the ceiling. Nothing on the list is a “maybe” when it affects whether the chimney can safely vent smoke and carbon monoxide out of the house.
The repairs that get skipped most often are the ones on the outside: a cracked crown, a loose cap, missing flashing. They don’t stop you from lighting a fire, so homeowners put them off. In Midland, blowing dust and sun do slow, steady damage to those surfaces, and a crown that’s allowed to open lets water into the masonry below it. Patching that early keeps you out of the firebox repair bracket later. When we look at a chimney, we give you the whole picture in one written estimate so you can decide what to do now and what can wait.
What Does a Chimney Inspection Cost, and Do I Need One?
A Level 2 chimney inspection in Midland usually runs $180-$450, and it’s the inspection to ask for if you’re buying a home, changing what you burn, or if the chimney hasn’t been looked at in a while. A camera inspection gives us a real look at the flue joints inside, not just what’s visible from the firebox. That’s where hidden cracks show up.
We recommend a Level 2 inspection any time the history of the chimney isn’t known, or when a sweep turns up something that needs a closer look. It’s also the right inspection before a liner or HeatShield application, because it confirms the flue is the right size and shape for the job. The cost of the inspection is small compared with finding out about a cracked flue the hard way. Call (866) 942-7865 and we’ll talk through which inspection fits your situation. Estimates are free, and we answer 24/7.
FAQs – Fireplace Services Cost
How much does a chimney sweep cost in Midland?
A standard chimney sweep in Midland costs $95-$250, and most single-flue residential chimneys land around $150-$200. The price reflects creosote level, flue height, and roof access. Two-flue chimneys run higher because each flue is swept and inspected separately. Call (866) 942-7865 for an exact quote. Estimates are free.
Is it cheaper to repair my fireplace or replace the chimney liner?
Repair is almost always cheaper when the flue is salvageable. HeatShield ceramic resurfacing runs $1,400-$2,800, while a full DuraFlex liner installation runs $2,600-$5,200. The right answer depends on how far the deterioration has gone, which is what the camera inspection tells us. If the flue is structurally sound enough for resurfacing, we’ll recommend it and save you the difference. Call (866) 942-7865 and we’ll put both numbers in front of you. Estimates are free.
Can you come out today?
Same-day service is often available, and we dispatch crews 7am to 7pm, Sunday through Friday. Call (866) 942-7865 and we’ll book the next opening. We answer 24/7, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
How much does it cost to fix a cracked chimney crown in Midland?
Crown repair or rebuild in Midland typically costs $400-$1,200. Sealing a hairline crack sits at the low end; a full crown replacement sits higher because the old crown has to come off first. Left alone, a cracked crown lets water into the masonry and turns a small repair into a bigger one. Call (866) 942-7865 for a free estimate.
Why is a chimney liner so expensive?
A DuraFlex stainless liner is a trade-grade product sized to your specific flue, and it priced by the foot. That’s why liner installation runs $2,600-$5,200 in Midland: the material, the insulation, the top plate, and the termination all add up. It’s also the component that makes the fireplace usable again. If your flue can be saved with HeatShield resurfacing instead, we’ll tell you. Call (866) 942-7865. Estimates are free.
Get a Free Fireplace Estimate in Midland
Whether you need a sweep, a liner, or a dryer vent cleaning, one call covers it. We stock trade-grade parts from Olympia Chimney, Copperfield, Gelco, and Famco, so routine repairs aren’t held up waiting on special orders. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Call (866) 942-7865 for a free estimate. We’ll look at the chimney, walk you through the options and the price, and you decide. The written estimate sets the final price.
Written by the team at Chimney Sweep Midland, serving Midland since 2011.
Pricing reflects the Midland market as of 2026. Chimney Sweep Midland offers free estimates. Call (866) 942-7865.
What Our Customers Say
"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Shanice Dawson"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Javier Martinez"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Carmen Guzman