Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Crane, TX
Chimney repair in Crane tends to start with the same discovery: a fireplace that’s been in the family room since the house went up in the oil-boom years, and a flue that has never once been looked at from the inside. Crane’s older ranch homes and worker cottages were built with masonry fireplaces and single-wall metal flue chimneys, and most of them are still running on the original liner. Our work in Crane is mostly bringing those systems back to something you can burn in safely: relining with DuraFlex, resurfacing with HeatShield where the flue is still salvageable, and resetting the caps and crowns that caliche dust and spring wind have worn down. Call (866) 942-7865 to book a look.
Why Crane Homes Are Different
Crane County is dry, windy, and coated in caliche dust for most of the year. That dust doesn’t stay outside. It blows into open flues, settles on the flue walls, and mixes with creosote to form a hard, gritty glaze that a light brush pass won’t touch. In wetter parts of Texas a chimney can go a couple of seasons between sweeps; in Crane the deposit builds faster and comes off harder, which is why we plan on more time per flue here and often bring hand tools rather than relying on a standard sweep alone.
Wind does the other half of the damage. Spring gusts take caps off, bend spark arrestors, and lift flashing at the roofline, and a missing cap on a Crane chimney means the next dust storm goes straight down the flue. The housing stock adds to it. Mid-century ranch homes and older cottages from the town’s boom eras were built with original masonry fireplaces and single-wall metal flue chimneys, often with no liner upgrade ever done. Many Crane households still burn wood for supplemental heat through the cool months, so those flues see real use, not decorative fires. If you’re in 79731 and your fireplace has never been inspected, that’s the place to start.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Crane Services
Two jobs come up most often when Crane homeowners call us, and they’re not the same kind of work. One is getting what’s already in the flue out of it. The other is on the other side of the house entirely, and it’s just as much a fire question.
Chimney Sweep in Crane
Sweeping a Crane flue means dealing with that caliche-and-creosote glaze, so we budget for it and use rods and brushes that can break it up rather than skim over it. We work from the top and the firebox, contain the dust, and run a camera so you see the flue wall yourself instead of taking our word for it. Blocked or missing caps get flagged while we’re up there, since that’s the entry point for everything the wind carries. For the full rundown on how a sweep works here, see Chimney Sweep in Crane.
Dryer Vent Cleaning in Crane
The same dust that loads a flue loads a dryer vent, and in Crane’s older homes the vent run is often longer than it should be, with a few elbows and a flap that no longer closes cleanly. Lint packs into those turns and cuts airflow, which is a fire concern, not a laundry annoyance. We pull the run apart, clear it, and check the exterior termination and flap, replacing tired components with Famco-compatible venting where needed. Details are on our Dryer Vent Cleaning in Crane page.
Chimney Repair in Crane
Most of the chimney repair work we do in Crane traces back to two things: a liner that was never upgraded when the house was built, and a cap or crown that wind and dust have taken apart. The original masonry fireplaces in Crane’s mid-century homes and older worker cottages were often built with single-wall metal flue chimneys, and decades of seasonal wood burning will crack mortar joints, pit the flue tile, and open gaps at the roofline where water and grit get in. We handle that whole range under Chimney Repair, from a cap that needs resetting to a full DuraFlex reline, and we tell you plainly when a repair can wait.
Chimney Cap Installation
Signs you need it
You’ll see it as a flue with nothing over the top, or a cap that’s bent, rusted through, or sitting crooked after a windstorm.
What it costs in Crane
Cap installation in Crane typically runs $175 to $450, depending on the flue size and whether the cap is a simple Gelco model or a custom multi-flue cover.
How we do it
We measure the flue opening, fit a Gelco cap or cover with the correct clearance and screening, and fasten it to the crown so wind can’t lift it.
Chimney Cap Replacement
Signs you need it
A missing, loose, or holed cap is the sign, and it usually shows up as grit and water staining inside the firebox after a blow.
What it costs in Crane
Replacing a cap in Crane typically costs $175 to $450, with larger or irregular flues landing at the upper end of that range.
How we do it
We remove the old cap and any failed fasteners, inspect the crown underneath for cracking, then set and secure a new Gelco cap sized to the flue.
What Chimney Repair Costs in Crane
| Item | Typical range in Crane |
|---|---|
| Chimney cap installation or replacement | $175 – $450 |
| Chimney crown repair | $300 – $650 |
| Chimney flashing repair | $275 – $700 |
Do I really need a new liner in my Crane chimney?
Not always. If the flue tile is intact and only the surface is deteriorating, HeatShield ceramic resurfacing can restore it. A cracked or separated liner does need relining, and we show you the camera footage before recommending either.
What actually happens if I skip chimney repair in Crane?
Small cracks and gaps get bigger with each season of use, and a compromised flue lets heat and gases reach places they shouldn’t. Call (866) 942-7865 for an exact quote – estimates are free, and we’ll tell you what can safely wait.
Brands We Service in Crane
We work with the trade brands, not hardware-store substitutes: DuraFlex liner systems, HeatShield resurfacing, Gelco caps and covers, and Olympia Chimney and Copperfield components. Caps, dampers, flashing, and venting parts come from Famco and Copperfield stock, so most Crane repairs don’t sit waiting on a special order. See our brands for the full lineup.
Pricing for Chimney Company in Crane, TX
| Service | Typical range in Crane |
|---|---|
| Chimney sweep | $150 – $350 |
| Chimney cap installation or replacement | $175 – $450 |
| Chimney crown repair | $300 – $650 |
| Chimney flashing repair | $275 – $700 |
| Chimney liner installation | $1,800 – $4,500 |
| HeatShield flue resurfacing | $900 – $2,200 |
| Dryer vent cleaning | $125 – $250 |
What pushes cost up in Crane is height and access at the roofline, plus how much of that caliche-and-creosote glaze has to come off before we can see the flue wall. Liner work depends on flue length and whether the chimney needs a cap and crown at the same time. The written estimate sets the final price, and you get it before any work starts.
See the difference
Before
After
Before
After
Before
AfterNeighborhoods We Serve in Crane
We cover Crane and the surrounding county from one dispatch point, so wherever you are in town the trip is the same. Homes near the older residential blocks along the center of town tend to have the original masonry fireplaces and single-wall metal flues, while places out toward the edges more often need cap and flashing work after a windy spring. One response note: we run fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday.
- Central Crane residential blocks
- Worker cottages near the older oil-boom-era streets
- Ranch-style homes on the town’s perimeter
- Rural properties in Crane County
Service Area – Cities Near Crane
Crane sits between Midland and the Permian Basin towns to the west, and we cover the ground around it. If you’re just outside Crane, we also work in Odessa, TX, Midland, TX, Gardendale, TX, and Garden City, TX. Same materials, same camera report, same flat price agreed before we book. Our home base is Midland, and Crane is a regular run for us.
Serving Crane, TX – Our Local Coverage Area
We serve Crane and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Crane
Yes, Crane is a standard run for us. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Most cities require a permit for structural chimney work, and that varies by job, so ask the City of Crane’s building department before scheduling. We don’t pull permits for you, and if an HOA covers your street, check their rules on exterior changes like caps and flashing.
All of Crane and the surrounding county, plus Odessa, Midland, Gardendale, and Garden City. If you’re unsure whether your address falls inside our range, call (866) 942-7865 and we’ll confirm before booking anything.
Getting a Chimney Estimate in Crane
Whether it’s a cap that came off in the last wind or a flue that’s never been relined, the starting point is the same: we look inside, show you the camera footage, and give you a flat price in writing before anything gets touched. Nothing is recommended without evidence you can see, and we’ll say plainly when a repair can wait a season. Call (866) 942-7865 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Crane Customers Say
"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- David Kim"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Shanice Dawson"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Javier Martinez