Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Stanton, TX
Chimney repair in Stanton is usually about old masonry, not decoration. Most of the homes here are modest single-story ranch houses and older farm and ranch places, and plenty of them still run the original brick firebox and damper that went in when the house was built. Add long dry stretches, blowing caliche dust, and mesquite or cedar smoke, and the wear pattern is different from what a suburban sweep sees. We work on that kind of chimney. Call (866) 942-7865 for a free estimate on repair, a sweep, or vent work.
Why Stanton Homes Are Different
Stanton sits in West Texas oil-and-ag country, and that shapes the work more than anything else. A lot of homes around here are outside town and have no gas service, so wood stoves and solid-fuel appliances do the heating that a gas furnace would do elsewhere. People burn mesquite and cedar because that’s what’s at hand. That fuel leaves its own kind of deposit, and it builds fast.
The climate is semi-arid and windy, with long dry spells, a handful of freezing nights, and dust that finds its way into flues and caps. Wind-blown caliche dust and mesquite smoke together leave a fine, hard glazed layer on flue walls that a brush alone won’t always lift. That’s a Stanton problem, not a generic one. And because so many rural homes sit well outside the 79782 core, a lot of chimneys here have never had a professional inspection since the fireplace was framed in. The first visit is often the first real look inside.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Stanton Services
Two jobs account for most of the calls we take from Stanton homeowners: a proper chimney sweep, and dryer vent cleaning.
Chimney Sweep in Stanton
A sweep here means more than running a brush up a flue. We remove creosote from the firebox walls, the smoke chamber, and the flue, then check the damper, the cap, and the masonry for cracks or gaps the dust and wind have opened up. Brush-soaked creosote off a ranch-house firebox is common work for us. Because so many Stanton chimneys burn wood as a primary heat source, we sweep to the glaze, not just the loose soot. If you want the full picture of what a visit covers, start with chimney sweep and we’ll take it from there.
Dryer Vent Cleaning in Stanton
Lint packed into a dryer duct is one of the leading residential fire causes, and it’s the part of a home’s exhaust system people forget about entirely. In a dusty, windy place like Stanton, grit and lint collect in the same run, and a vent that’s partly blocked makes the dryer work harder and run hotter. We clear the full duct run, check the outside termination, and fit Famco-compatible venting parts where something’s worn out. It’s a fire-safety service, not a cleaning chore. See dryer vent cleaning for what the visit involves.
Chimney Repair in Stanton
Chimney repair in Stanton starts with the housing stock: original brick fireboxes and dampers from decades past, wood stoves instead of factory-built inserts, and a lot of homes that have never been inspected since the fireplace was built. The dry, windy climate and the caliche dust speed up the wear. We handle Chimney Repair as a full scope, from caps and crowns to relining a flue that’s no longer safe to burn in. Trade-grade parts, sourced through Olympia Chimney and Copperfield, go into every job.
Chimney Cap Installation
Signs you need it
An open flue with no cap, or one that’s letting blowing dust and grit straight into the firebox, is the clearest sign.
What it costs in Stanton
Cap installation typically runs $180 to $450, depending on the flue size and the cap style.
How we do it
We measure the flue, fit a Gelco cap with the right mesh and clearance, and fasten it down against the wind.
Chimney Cap Replacement
Signs you need it
A rusted, dented, or storm-bent cap, or one that’s come loose after a windy stretch, calls for replacement rather than patching.
What it costs in Stanton
Replacement typically runs $180 to $450, with the exact price set by the written estimate.
How we do it
We pull the old cap, inspect the flue top while it’s open, and fit a new Gelco cap sized to the flue.
Chimney Liner Installation
Signs you need it
Cracked or missing clay tile, a flue that’s too small for the appliance, or visible gaps in the liner all point to relining.
What it costs in Stanton
Liner installation typically runs $1,800 to $4,200, depending on flue length and liner type.
How we do it
We run a DuraFlex flexible liner down the flue, connect it at the appliance and the top, and insulate where needed.
Chimney Flashing Repair
Signs you need it
Water staining on the ceiling near the chimney, or flashing that’s lifted away from the roof, means it needs attention.
What it costs in Stanton
Flashing repair typically runs $250 to $650, depending on how much of the flashing gets replaced.
How we do it
We reset or replace the flashing, seal the joints with the right roofing components, and check the surrounding shingles.
Chimney Crown Repair
Signs you need it
A cracked or crumbling crown, or one that’s pulling away from the flue, lets water in and needs repair or recasting.
What it costs in Stanton
Crown repair typically runs $300 to $800, depending on the extent of the damage.
How we do it
We remove the failed crown material, recast or repair it with a proper slope, and seal it against the flue.
What Chimney Repair Costs in Stanton
| Item | Typical range in Stanton |
|---|---|
| Chimney cap installation or replacement | $180 – $450 |
| Chimney liner installation | $1,800 – $4,200 |
| Chimney flashing repair | $250 – $650 |
Do I really need a new liner in Stanton?
Not always. If the flue wall is sound, HeatShield ceramic resurfacing can restore it instead of a full reline. We check the flue with a camera first and show you what we find before recommending either.
Can chimney repair in Stanton wait until fall?
Some repairs can wait, some can’t. A cracked crown or loose flashing should be handled before the next weather front. A damaged flue liner shouldn’t wait if you plan to burn. We tell you plainly which category your chimney is in.
Brands We Service in Stanton
We work with DuraFlex liner systems, HeatShield ceramic resurfacing, Gelco caps, and Olympia Chimney and Copperfield components. Because we stock Famco and Copperfield parts locally, most repairs aren’t held up waiting on a special order. Take a look at our brands to see the full set we source from.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Stanton, TX
| Service | Typical range in Stanton |
|---|---|
| Chimney sweep and inspection | $150 – $300 |
| Dryer vent cleaning | $100 – $225 |
| Chimney cap installation or replacement | $180 – $450 |
| Chimney liner installation | $1,800 – $4,200 |
| Chimney flashing repair | $250 – $650 |
| Chimney crown repair | $300 – $800 |
| HeatShield ceramic resurfacing | $700 – $1,600 |
Prices climb when a Stanton chimney has gone years without inspection: heavy glaze means more sweep time, and old brick fireboxes often need repair work that a newer factory-built insert wouldn’t. Flue length and access matter too, especially on rural homes set well off the road. Every job gets a written, upfront price before we start, and the estimate is free.
Neighborhoods We Serve in Stanton
We cover Stanton and the surrounding ranch country, including the homes spread out along the county roads outside the 79782 core. If your place is a few miles out of town, that’s fine, we’ve made that drive plenty of times. Response timing depends on how far out you are that day, and we’ll tell you when we book the visit rather than leaving you guessing.
- Downtown Stanton
- The residential blocks along the main east-west streets
- Ranch homes on the county roads west of town
- Farm properties on the south side
- Outlying rural acreage in the surrounding county
Service Area – Cities Near Stanton
Stanton sits between a few bigger towns, and we cover them all. If you’re just outside our primary area, we can still help. We serve Midland, TX on the east, Big Spring, TX to the northeast, Garden City, TX to the south, and Gardendale, TX to the northwest. Give us a call and we’ll confirm coverage for your address.
Serving Stanton, TX – Our Local Coverage Area
We serve Stanton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Stanton
We answer 24/7 and fast dispatch runs 7am to 7pm, Sunday through Friday. We’re closed Saturday. A call outside dispatch hours is booked into the next opening. Most Stanton visits get scheduled within a few days, and rural addresses may take a little longer.
Most cities require a permit for structural chimney work, so it’s worth calling the City of Stanton building department before a liner or crown job. HOA rules vary by neighborhood. We’ll walk you through what a repair typically triggers and what it doesn’t.
Yes. A good part of our Stanton work is on ranch and farm properties outside town with no gas service and wood stoves as the main heat. We come out to those addresses. Call us with your location and we’ll set up a visit.
Ready to get your chimney checked? Call (866) 942-7865 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Stanton Customers Say
"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Alma Garcia"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- David Kim"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Shanice Dawson