Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in West Odessa, TX
We provide independent Gelco chimney service across West Odessa – cleaning, cap replacement, Level 2 inspection, and gas fireplace work on the factory-built units common in this part of Ector County. What sets our Gelco work here apart is simple: we treat a Gelco factory-built fireplace as engineered venting that has a spec, not as a masonry flue to be brushed and forgotten. We read the data plate, clean to that spec, and check the clearances nobody else looks at. We’re not affiliated with, authorized by, or endorsed by Gelco. We’re an independent crew that works on these units constantly. Call (866) 942-7865. We answer 24/7.

Why West Odessa Residents Choose Us for Gelco Service
Most sweeps in the Permian Basin know masonry. Fewer know what to do with a double-section HUD-code home, a field-installed wood stove, or a vented gas firebox that was set to spec fifteen years ago and never touched since. That gap is where we live. Our owner, Tony Rhodes, learned the trade through hands-on coursework at Midland College before starting this company in 2011, and Gelco chimney caps and factory-built fireplaces have been a steady part of the work ever since – the caps, the dampers, the venting, the whole assembly.
What that means for you: an independent shop that reads the data plate before touching anything, sources quality parts that actually fit the unit in your home, and tells you which parts are original-spec and which are quality aftermarket when the original has been discontinued. No guessing. No hardware-store substitutes jammed onto a factory flue top. And scheduling is straightforward – you’ll get a clear window, a written estimate, and a straight explanation of what we found. Tony puts it plainly: “If I can show you what I found, I will – a flashlight and a straight answer go a long way.” That’s the standard on every West Odessa job.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in West Odessa
These aren’t hypothetical failure modes. They’re the ones we open up on a regular basis, and each one has a local cause behind it.
- Caps packed solid with caliche dust and bird nests. The Permian Basin wind drives fine caliche into Gelco cap screens until the mesh closes up and draft collapses. When the draft goes, the fire back-puffs into the room. West Odessa properties on open acreage catch more of this than homes tucked inside town.
- Field-installed stovepipe too close to combustible paneling. When a wood stove or fireplace is installed after the home is set, single-wall stovepipe sometimes ends up run tight against paneling. A homeowner never sees it. A sweep or camera inspection catches it in minutes, and it’s one of the first things we check on a West Odessa manufactured home.
- Creosote sitting for months in a short heating season. West Odessa’s winter is real but brief, and the fire volume rarely builds enough to dry out glazed deposits on Gelco firebox walls and flue collars. Spring and fall cleanings matter here more than they would in a colder climate.
- Seized dampers and cracked firebox panels on units 15 to 25 years old. Original Gelco venting and dampers were installed to spec but often never serviced. The hardware rusts, the damper sticks open or shut, and the firebox panel cracks from heat cycling.
- Rusted cap hardware on original flue tops. The cap is the first thing the weather hits and the last thing anyone inspects. Failed fasteners and corroded screens let water and animals in long before the homeowner notices a problem.
Gelco Service in West Odessa: What Local Conditions Mean for Your Equipment
Here’s the fact that shapes everything about Gelco work in West Odessa: this community sits outside Odessa city limits in Ector County, and there’s no municipal chimney-sweeping code or inspection program to prompt maintenance. A Gelco factory-built fireplace in a West Odessa home can go two decades without anyone pulling the cap or scoping the flue. Nobody gets a reminder letter. Nobody fails an inspection. The unit just keeps running, quietly collecting creosote and dust. That’s the maintenance gap, and it’s why a Level 2 inspection is our starting point on so many units out here rather than an upsell.
Out on the acreage tracts west of Loop 338, our tech pulled a Gelco cap off a double-section unit and found the screen packed solid with caliche dust and an old bird nest – with single-wall stovepipe run tight against the paneling from a field install after the home was set. We scoped the flue on a Level 2, cleared the cap, reset clearance where we could, and fitted a new Gelco-fit cap. The draft came back and the back-puffing stopped. That’s a typical West Odessa call. The homeowner had no way of knowing any of it was wrong.
Gelco Models & Products We Service in West Odessa
We work on Gelco direct-vent gas fireplace inserts in double-section HUD-code homes, wood-burning fireplace inserts with field-installed single-wall stovepipe, vented gas log sets and vented gas fireboxes in starter-site builds, and Gelco chimney caps and multi-flue caps on factory-built flue tops across West Odessa. Each of these needs a different approach – a direct-vent insert isn’t cleaned like a wood firebox, and a gas log set has its own service rhythm.
Parts-wise, we match Gelco OEM venting components, caps, and dampers wherever they’re still available, and move to quality aftermarket caps and firebox hardware only when the original has been discontinued. We always tell you which you’re getting. On a 20-plus-year-old Gelco insert with a cracked firebox and rusted venting, we’ll give you an honest repair-versus-replace call rather than patching a unit that isn’t safe to run.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in West Odessa
Every Gelco job is priced per job by written estimate, and the estimate is free. What drives the number: whether the unit needs a standard sweep or a Level 2 inspection with camera scope, whether the cap needs replacing or just clearing, whether the damper or firebox hardware is seized or cracked, and whether the venting has to be re-fitted to restore clearance.
| Service | Typical estimate range |
|---|---|
| Standard Gelco fireplace/stove sweep | Free estimate sets the price |
| Level 2 inspection with camera scope | Free estimate sets the price |
| Gelco-fit cap replacement | Free estimate sets the price |
| Gas fireplace service and damper work | Free estimate sets the price |
We don’t quote a number over the phone and then change it on the driveway. Nothing gets recommended without photo evidence you can see yourself, and if the work can safely wait until fall, we’ll say so. Call (866) 942-7865 for a free estimate.
Serving West Odessa, TX – Our Local Coverage Area
We serve West Odessa and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in West Odessa
Yes, and arguably more so. Ector County has no municipal chimney-sweeping code or inspection program outside Odessa city limits, so nothing prompts maintenance on a Gelco factory-built unit in West Odessa. The lack of code doesn’t change how creosote and caliche dust behave. Call (866) 942-7865 for a free estimate – estimates are free.
Almost always a blocked cap. Permian Basin wind drives caliche dust and debris into Gelco cap screens until the mesh closes and draft collapses, so smoke finds its way into the room instead of up the flue. A cap clean and a Level 2 scope will confirm it. Call (866) 942-7865 for a free estimate.
Yes. Field-installed wood stoves – common on the acreage tracts west of Loop 338 – are exactly the setups we specialize in. We scope the flue, check clearance between single-wall stovepipe and paneling, and clean to the venting’s spec rather than brushing it like masonry. Call (866) 942-7865 for a free estimate.
Once a year is the safe rhythm for a vented gas firebox or gas log set, given how much dust the Permian Basin climate pushes through the system. Spring and fall are the natural bookends for West Odessa. Call (866) 942-7865 for a free estimate.
When the firebox is cracked and the venting is rusted through, replacement is usually the honest call rather than a patch. On a 20-plus-year-old Gelco unit in West Odessa, we’ll show you the evidence and give you the repair-versus-replace recommendation straight. Call (866) 942-7865 for a free estimate.
Service Areas Near West Odessa
We serve West Odessa and the surrounding communities: Odessa, Midland, Gardendale, Stanton, and McKinney Acres, as well as Andrews. If you’re unsure whether your home is in our West Odessa coverage, a quick call settles it.
Book Your Gelco Service in West Odessa Today
Whether it’s a cap that needs clearing, a Level 2 inspection on a unit that’s never been scoped, or gas fireplace service before heating season, we’ll give you a free estimate and a straight answer. Call (866) 942-7865. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. For the wider Gelco story, see our brand page; if you’re near McKinney Acres or Andrews, we cover those too.
Written by Tony Rhodes, Owner at Chimney Sweep Midland, serving West Odessa since 2011.